|Description of material||Special technical covering for humid interiors (bathrooms, kitchens, gyms, wellness centres)|
|Nature of components||Substrate: printed fibreglass - Transparent finishes and waterproof primer|
|Total weight (minimum ÷ maximum)||Fibre: 290 g/m² ÷ 310 g/m2 / Complete system: 740 g/m² ÷ 780 g/m²|
|Total thickness (minimum / maximum)||Fibre: 0.5 mm / Complete system: 1.5 mm|
|Adhesion to the substrate||Category 2 according to EAG022 (adhesion force > 0.5 Mpa)|
|Resistance to water||No passage of water under the applied pressure of 150 kPa for 7 days.|
|Resistance to cracks||Category 3 according to ETAG 022|
|Initial adhesion||Category 2 according to ETAG 022|
|Adhesion after temperature cycles||(1.40 ± 0.16) MPa Category 2 according to ETAG 022|
|Adhesion after immersion in water||(1.35 ± 0.10) MPa Category 2 according to ETAG 022|
|Adhesion after immersion in alkaline environment||(1.12 ± 0.04) MPa Category 2 according to ETAG 022|
|Reaction to fire||Class B s1 d0|
Once you delete a project and all of its Pins, you can't undo it.
Once you unpin, you can't undo it.